WHY USE PURIFY O3 ELITE FOR CPAP TUBING & MASK CLEANING?

CPAP tubing and masks can be a breeding ground for
bacteria, germs or mold due to their coiled design. The
ringed ridges on the interior are difficult to clean and
disinfect with just soap and water. Purify O3 Elite
generates ozone which permeates the tubing to sanitize
the small, hard to reach ridges effectively.
‐ Utilizing unclean CPAP equipment exposes the user to
potential health risks via direct exposure to bacteria,
viruses, and molds. This may raise the possibility of nasty
colds and sinus infections.
‐ Hand washing tubing and masks opens the possibility of
the equipment coming into contact with bacteria on
surfaces.
‐ Purify O3 Elite is FDA registered and is proven to be a safe
and effective way to disinfect and kill up to 99.99% of
germs and bacteria on PAP & medical equipment.

CUSTOMERS PREFER PURIFY O3 ELITE FOR ITS EASE OF USE!
‐ Universal design works with any mask, tubing and CPAP
humidifier/machine. A heated tubing adapter is included
for use, if required.
‐ All‐in‐one kit! Everything you need to get started is
included, no additional chemicals, replacement sanitation
bags, filters or accessories are necessary.
‐ Simple to use ‐ one button push to start. Auto shut‐off
after disinfection cycle completes.
‐ Ultra‐quiet cleaning cycle

QUICK DISINFECTION CYCLE ELIMINATES TIME CONSTRAINTS
‐ Purify O3 Elite offers one of the shortest disinfection
cycles on the market at just 35 minutes. (90 minute
additional rest is recommended after cycle completion)
‐ Hand cleaning with soap and water is cumbersome and
requires prolonged drying time and space.
‐ Automatic shut‐off after sanitation cycle is complete
allows users to set it and forget it! The Purify O3 Elite
disinfects PAP equipment with just the touch of a button.

SMALL SIZE ‐ ELIMINATES SPACE CONCERNS
‐ Compact design stores in included travel/sanitizing bag
and easily fits into a bedside drawer.
‐ Rechargeable battery charges via USB connection or any
outlet – doesn’t take up outlet space or crowd the
nightstand.
‐ Purify O3 Elite stores away when not in use – other CPAP
disinfectors are bulky in size and take up valuable bed side
table space that may already be limited by having a clock,
lamp and CPAP Machine.

COMPACT DESIGN – PERFECT FOR TRAVEL!
‐ Purify O3 Elite is compact & lightweight (less than ½ lb!),
designed for both home and travel. Unit stores in the
included travel/sanitizing bag and takes up minimal space
in overnight bags.
‐ Ensures your PAP equipment stays clean while away from
home. Often soap/water cleansing with necessary drying
time/location is not available.
‐ Long‐lasting rechargeable battery allows for multiple uses
on a single charge, eliminating worries about outlet
availability or having to recharge often.

WHY CHOOSE PURIFY O3 ELITE OVER THE COMPETITION?
‐ Purify O3 Elite is FDA Registered – other competitive, low
end sanitizers are not compliant.
‐ Purify O3 Elite is third‐party tested for efficacy.
‐ Closed container disinfection process ensures safe and
effective equipment sanitation at a higher cleaning
efficacy than other products on the market.
‐ Simple one‐step sanitizing process. No replacement
filters, bags or pre‐wash solutions required.

PURIFY O3 ELITE OPERATION TIPS
‐ Prior to sanitizing, use a CPAP wipe or damp cloth
remove any particles and oils from the mask. The Purify
O3 Elite will not remove physical bodily fluids and debris.
‐ One button touch to start – cover and hold 3‐4 seconds
until unit beeps. The unit will auto shut‐off after 35
minute disinfection cycle is complete.
‐ Allow Purify O3 Elite and CPAP equipment to sit for 90
minutes to allow the residual ozone to further dissipate
before using.
‐ To turn off during the cycle, touch and hold the button
for 5‐6 seconds until the unit beeps.
‐ To charge ‐ connect USB cable and plug into any wall
outlet or USB port. All four battery indicator lights will be
lit when charging is complete.

PURIFY O3 ELITE DISINFECTION PROCESS
Daily Cleaning: Mask and Tubing
1. Prior to sanitizing, disconnect mask and tubing from PAP
machine. Use a CPAP wipe or damp cloth remove any
particles and oils from the mask. The Purify O3 Elite will
not remove physical bodily fluids and debris. NOTE:
Most CPAP wipes are for pre‐cleaning and are a NOT a
disinfectant – they will not kill germs & bacteria.
2. Connect the tubing to the Purify O3 Elite unit and place
mask, tubing and sanitizer inside the sanitizing case. If
the tubing and mask assembly is too large for the case, a
medium‐sized storage container with lid (less than 12
qts) may be used. For mask‐only sanitation, place mask
and Purify O3 Elite unit inside sanitizing case.
3. Touch and hold On/Off button for 3 seconds to turn on
the Purify O3. Zip case fully closed (or secure container
lid, if utilizing). The disinfection cycle will run for
approximately 35 minutes and will automatically shut of
when complete. Wait 90 minutes after cleaning cycle
completes to remove from container.
Weekly Cleaning: Tubing and Humidification Chamber
1. Disconnect mask from tubing. Empty any remaining
water from humification chamber. Place the Purify O3
Elite, humidification chamber and tubing in a plastic
storage container with lid (12 quarts or less). Note: The
Purify O3 Elite may be attached to the tubing, if desired.
2. Turn on Purify and securely close the lid. The disinfection
cycle will run for approximately 35 minutes and will
automatically shut of when complete. Wait 90 minutes
after cleaning cycle completes to remove from container.

Secure Checkout with Visa MasterCard or Amex.